OUTDOOR FURNITURE

CARE & MAINTENANCE

Here is our advice and tips to keep your OHMM furniture looking
great and giving you many years of service. Like most things in life,
a little time and effort in maintenance goes a long way.

OHMM FIBRE

OHMM woven furniture requires minimal maintenance. Simply use a mild detergent with luke warm water and a soft non-abrasive brush. Rinse with a gentle spray of clean water from a hosepipe or bucket. Dry with a clean cloth if needed. Avoid using any abrasive cleaning materials or solvents.

CUSHIONS

Remove cushions covers from the foam pads and wash at less than 100°F/38°C with a mild detergent. Hand washing is recommended rather than machine washing. Scrub vigorously any tough stains with a soft brush. Rinse in cold water and then simply line dry. You can also spot wash any stains without removing the covers by scrubbing vigorously with a soft brush and mild soap and wipe down with cold water to rinse. See Fabric Care Info Sheet for more detailed information. For maximum performance, keep your cushions dry and clean whenever possible. Take care when removing and reinstalling the foam pads. Fold the pads in half and insert them into the covers and then adjust to fit.

HPCL TOPS

Basic Cleaning - Use a clean, damp, non-abrasive cotton cloth with a mild liquid detergent or household cleaner. Clean the soiled area using a rotating motion. Stubborn Stains - For tougher stains, a baking soda paste or an ammonia-based cleaner can be effective. Alternatively, you may use methylated spirit on a soft cloth, applied in a circular motion. Rinsing & Drying - After cleaning, thoroughly rinse the surface with clean water using a non-abrasive cotton cloth. Dry the surface with a soft, clean, non-abrasive cotton cloth to ensure no cleaning residues remain. Edges - We recommend lightly scrubbing with silicone oil.

TEMPERED
GLASS

Use a good quality glass cleaner to get a streak free glass top.

FERRULES

Clean the furniture ferrules on an occasional basis with a dedicated stainless steel cleaner such as 3M’s Stainless Steel Cleaner.

PROTEKT
COVERS

Clean covers with a soft cloth and warm water, using a gentle upholstery cleaner if necessary. Rinse with clear water. Solvents are not suitable for cleaning the covers and may cause damage and discoloration to their surface. Never pack or fold covers that are wet; instead, let them dry in a well ventilated area. Hand wash only. Do not bleach or iron the covers.

DISCOVER MORE